published date : mar 18,2008 drawing no :sdsa 2825 v6 checked : shin ch i p.1/4 part number: FUR20D6A 20mm big lamp www.sunled.com features 12 pins. high luminous intensity. low power consumption. wide viewing angle. categorized for luminous intensity. excellent on/off contrast. easy mounting on p.c. board or sockets. solid state reliability. rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subjec t to change without notice. part number emitting color emitting material lens-color luminous intensity (if=10ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. FUR20D6A red gaasp/gap red diffused 12 49 627 120 absolute maximum ratings (t a =25c ) ur (gaasp/gap) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10duty cycle 0.1ms pulse width i fs 160 ma power dissipation p t 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3~5 seconds ur (gaasp/gap) unit forward voltage (typ.) (if=10ma) vf 1.9 v forward voltage (max.) (if=10ma) vf 2.5 v reverse current (max.) (vr=5v) ir 10 ua wavelength of peak emission (typ.) (if=10ma) p 627 nm wavelength of dominant emission (typ.) (if=10ma) d 625 nm spectral line full width at half-maximum (typ.) (if=10ma) ? 45 nm capacitance (typ.) (vf=0v, f=1mhz) c 15 pf operating characteristics (ta=25c )
published date : mar 18,2008 drawing no :sdsa 2825 v6 checked : shin ch i p.2/4 part number: FUR20D6A 20mm big lamp www.sunled.com ? ur
published date : mar 18,2008 drawing no :sdsa 2825 v6 checked : shin ch i p.3/4 part number: FUR20D6A 20mm big lamp www.sunled.com remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : mar 18,2008 drawing no :sdsa 2825 v6 checked : shin ch i p.4/4 part number: FUR20D6A 20mm big lamp www.sunled.com packing & label specifications FUR20D6A
|
